Micro Moisture Analyzer FM-300A
This simple-to-use system allows the user to accurately measure samples as low as two parts per million(2ppm). Unlike Karl Fisher Titrators since no chemical reagents are used, only moisture is measured (as chemical interaction is eliminated).Kett's FM-300A eliminates the cost of reagents and preparation necessary for Karl Fisher Titrators as well as the expensive disposal cost of the verious wastes.
| ●Specifications | FM-300A |
|---|---|
| Measurement method | Filter Moisture Adsorption |
| Sample mass | 10mg~5g |
| Resolution | 0.01mg) / 2ppm (When a sample weights 5g) |
| Measurement mode | Time/Automatic measurement |
| External I/O | Standard RS-232C serial interface Parallel out-put for optional printer |
| Heat source | 400W EC heater |
| Power source | AC100/120/220/240V(50/60Hz) |
| Dimension & weight | Net;585(W)X520(D)X480(H)mm,approx.37kg Shipment; (Wooden)750X620X550(mm),approx.48kg (Carton)520X420X380(mm),approx.8.5kg |
| Options | Printer model VZ-330(including printer cable) Data logger software(KDL-01) |